For a replacement hinge for your Jet Bag rooftop cargo box you can refer to the linked page for all brands of cargo box parts. Some brands of cargo box, such as Thule and SportRack, come from the same parent company and so they can often share replacement parts. Since we do not carry Jet Bag products I cannot say for sure that we have an item that will work but you can see hinge parts such as # SR03396 and # TH13227 by clicking on the hinge category on the linked page. You can also see... view full answer...
Hi!
The correct replacement key for your a Thule lock core with N105 on it is Replacement Key # THKEYN105. This key will work so long as you have a Thule lock core with N105 on it. view full answer...
I may be able to help you with a Replacement Lock Core and Key # SR03807 as we do not have a replacement key for K108 locks. This lock and core we have found to work with several of the roof top carriers like your Jet Bag Explorer. Be sure to verify this is similar style lock to what you currently have. view full answer...
Thule actually helped make the JetBag which is part of the Explorer Series roof top cargo boxes which means their replacement key # THKEYN2874 is the correct replacement key for your application! This means you can simply order the key without having to replace your current lock cores.
I verified this with my contact at Thule. view full answer...
I may have a solution for you but we don't carry the hooks to connect the old X-Cargo boxes that used the straps. Like you mentioned we have the straps, part # SR02918, which are 1 inch wide. We also have some clips for RightLine Gear cargo bags, part # RL100600, that have an opening to receive a 1 inch strap. They're designed to clip around the edges of the doors like the hooks for the X-Cargo box did, even though they aren't the exact ones.
I contacted Thule about the original hooksfor... view full answer...
For your old X-Cargo roof box, you will want the Replacement Master Parts Bag for X-Cargo Model 28 Cargo Box # TH04870. This will give you all the hardware you need to make your box functional.
You can alternatively use the Replacement Latch for SportRack Explorer Cargo Box # 03347 and the Replacement Spring Hinge for SportRack Explorer Cargo Box # SR03810 for the hinge. view full answer...
We have exactly what you need, that is the Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers, # 753-0783.
And FYI, in case needed in the future, we also have the Replacement Hardware Bag #2 for Thule Canyon XT Roof Cargo Basket, # 7521807001. This has multiple replacement parts in a kit. view full answer...
We sure do! To replace the anti-rattle hitch pin for your 24x60 etrailer Cargo Carrier # e98874 I recommend using the Threaded Anti-Rattle Pin Lock # e99047 so you take out any play in the cargo carrier moving in the receiver, plus it secures your carrier to the vehicle with a lock. view full answer...
I went ahead and checked for a replacement key for your Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount # NV22B, and it does not appear that Kuat offers a replacement.
Instead, what you can do is use the Replacement Lock Cores for Kuat Cargo Carriers and Bike Rack # LOCO.
This kit includes 2 Lock cores, 3 keys, 1 core removal tool, and a burlap storage bag. All you'd need to do is use the change key to remove the lock core and replace with the included lock core, from here... view full answer...
Since your trailer hitch receiver has a 500lb tongue weight rating, and using the Roadmaster Spare Tire Carrier # RM-195125 will reduce the capacities by 33% you are correct that you are left with 335lbs of tongue weight capacity on your receiver.
Since the # RM-195125 weighs 44lbs and the spare tire weighs 75lbs that leaves your receiver with about 215lbs of tongue weight left, so you will be able to use the full 200lb tongue weight rating of the tire carrier without an issue.
You mentioned... view full answer...
We do not have replacement shanks for Haulmaster cargo carriers, but you could use the Malone Dual Hitch Extender, # MPG544. This adapter fits a 2 inch x 2 inch trailer hitch receiver and it provides a 2 inch x 2 inch receiver with a rise of 7-1/2 inches. Please note, only the bottom receiver on this adapter can be used for towing. The upper receiver should only be used for hitch mounted accessories such as bike racks or cargo carriers.
Also, it is important to note that using a hitch... view full answer...
Yes, we have just what you need. The Yakima EXO SwingBase Swing Away Hitch Extender - 2" Hitches
Item # Y34VR is a complete arm assembly for the Yakima EXO Swinging Enclosed Cargo Carrier for 2" Hitches # Y62VR. view full answer...
As the JetBag Explorer has been out of production for a while now, it does make replacing this a little more difficult, but not impossible. We will not have a direct replacement for this key number, but I do have a couple other options.
First will be the Replacement Lock Core and Key for SportRack Explorer Cargo Box # SR03807. This will require the removal of your current locks, but we have had people use this in the past. You'll need to make sure your lock core looks like this one to... view full answer...
What you could use to raise up the Flint Hill Goods Cargo Carrier part # FHG77ZR that you have is the Curt Multipurpose ball mount # D210 which will give you additional vertical height and would be rated for the weight of your scooter and the carrier. view full answer...
I have an answer for you. Unfortunately, I confirmed with our engineering team that if you have an etrailer cargo carrier like the 24x60 etrailer Cargo Carrier for 2" Hitches # e98874, we do not carry a replacement tilting mechanism for those carriers. With that being said, the only route forward is a custom fabrication or to purchase a completely new unit. However, we do not recommend a custom fabrication due to safety concerns. view full answer...
The anti-rattle pin for the Folding 24x62 etrailer Cargo Carrier for 2" Hitches # e98872 can be replaced with the Threaded Anti-Rattle Hitch Pin and Clip # e98910 or upgraded to the Lock for etrailer Cargo Carriers # e99047. view full answer...
I reached out to my contact at Thule who said that they typically only keep replacement parts for discontinued products for about 5 years after the fact. Since your JetBag cargo box is at least 20 years old they unfortunately don't have any replacement struts or replacement keys for that 3029A lock core you mentioned.
Because of this I recommend replacing your cargo box to something a little more current like the Thule Pulse Alpine # TH613. The Pulse Alpine has 11 cu ft of internal storage... view full answer...
We have # HTAD and # 80303 that would work great for your hitch. We do not carry just the two support bars for the Rola Swinging Cargo Carrier. We have the Rola Cargo Carrier Swinging Arm Assembly # 10421 that you can get to complete your set up. view full answer...